All prices are shown excluding VAT
1x Wireless FIZ Hand Unit
2x Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings
1x Wireless Handle Left (Focus)
1x Wireless Handle Right (Iris, Zoom)
4x Follow Focus marking disks
1x 7-Pin to 740mm P-TAP Motor Power Cable
1x 296mm 7-Pin to 7-Pin Straight Motor Connection Cable
1x 180mm 7-Pin to 7-Pin Straight Motor Connection Cable
6x Battery
1x 4 Slot Battery Charger
2x Handle to Arri Standard Rosette Adapter
2x Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
1x Wireless FIZ Hand Unit Strap
1x Hard Shell Waterproof Safety Case
The Nucleus-M is a wireless 3 Channel system. Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
Each motor has a built-in MDR unit, saving space and setup time. A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors. There is no limit on the amount of motors an operator can attach per channel.
The FIZ hand unit and two handle grips have a wireless range of 1000 feet. The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory. Both hand grips and FIZ hand unit run off .When fully charged the batteries in the hand grips can last up to 2 days. The batteries in the FIZ unit can last up to 10 hours.
FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm . Motors can calibrate on lenses without hard stops – such as photo-lens with follow focus gears.
Motors fit standard 15mm and 19mm Rods . Ideal for Gimbal, Drone, and Shoulder-mounted setups
